| Refer CMVR Rule 50 for detailed information / guideline on HSRP Features |
| HSRP Plate shall be a solid unit made of 1.0 mm aluminium conforming to DIN 1745/DIN 1783 or ISO 7591. Border edges and corners of the plate shall be rounded to avoid injuries to the extent of approx. 10 mm and the plates must have an embossed border. |
| The plate shall be suitable for hot stamping and reflective sheet has to be guaranteed for imperishable nature for minimum five years. The fast colouring of legend and border is done by hot stamping. |
| IND |
| Plate should bear the letters "IND" in blue colour on the extreme left centre of the plate. The letter should be one-fourth of the size of letters mentioned in rule 51 and should be buried into the foil or applied by hot stamping and should be integral part of the plate |
| Hologram |
| Plate shall be protected against counterfeiting by applying chromium-based hologram, applied by hot stamping. Stickers and adhesive labels are not permitted. |
| Laser Code |
| The plate shall bear a permanent consecutive identification number of minimum seven digits, to be laser branded into the reflective sheeting and hot stamping film shall bear a verification inscription. |
| Third Sticker |
| Third registration mark in the form of self-destructive type, chromium based hologram sticker shall be affixed on the left-hand top side of the windshield of the vehicle. The registration details such as registration number, registering authority, etc., shall be printed on the sticker. |
| Snap Locks |
| Plate shall be fastened with non-removable/non-reusable snap lock fitting system. |
| Size of the Plates for different categories of Vehicles are prescribed as follows: |
| For Two and Three Wheelers: 200 x 100 mm and 285 x 45 mm |
| For Light Motor Vehicles Passenger cars: 340 x 200 mm and 500 x 120 mm |
| For Medium Commercial Vehicles, Heavy Commercial Vehicles & Trailer combination: 340 x 200mm |
|